The new VoxBox Pro MKII has several new improvements over the previous model:
- Completely re-designed and built using lightweight aluminium throughout.
- Now you can use wider lenses (approx 24mm on a Super 35mm sensor; approx 35mm on a full frame sensor).
- The glass mounting, height adjustment and tilting side mirror have been re-designed.
Effortless setup – be ready to roll in minutes
There are no cumbersome tripod plates or adaptors to fit – the unit simply attaches in place of your matte box to existing 15mm rails. The kit can be stored fully-rigged in the case meaning no time is wasted on location during setup – it can be rigged and ready to use in under two minutes! If you don’t have rails or you are using a DSLR, the kit includes a 16mm receiver allowing it to be mounted on a standard lighting stand.
Portable and Flexible
Challenging spaces are no problem for the VoxBox Pro – the unit can be quickly configured to allow the interviewer to sit at one of several possible positions. For shooting-producers/directors or camera operators, the unit comes with a side mirror which allows operation of the camera whilst maintaining eye contact with the subject through the VoxBox Pro. This flexibility allows you to quickly adapt to each location.
Converts to a Teleprompter
Switch from interview mode to Teleprompter mode in seconds! A tablet holder is included which attaches to the unit, converting it to a Teleprompter.
Designed for busy crews
With the time pressures facing crews on location, the VoxBox Pro makes life easier when shooting down-the-lens interviews. The ultra-quick setup allows you to spend more time getting the shot right – not trying to attach cumbersome adaptors and balance tripod plates. The sturdy, robust construction withstands day-to-day handling and uses hardware fixings throughout – not hook-and-loop or bungee cord found in similar products.
What’s in the box
- Main box
- Beamsplitter glass
- Tilting side mirror
- Tablet holder
- Doughnuts (63, 80 & 112mm)
- 16mm receiver
- Printed instruction manual
- Hard Case with laser-cut foam
NOTE: The cameras, tablet, stands and tripods shown are not included and shown for demonstration purposes only. The kit is not supplied with mounting rails; you should have these already if you have a matte box.