VoxBox Pro MKII Kit

£1,499.00 ex VAT. (Only UK customers will be charged VAT at the checkout.)

Non-UK Customers: Any VAT/TAX will be removed at the checkout after you select your country. See our Help>FAQ section for details.

Perfect down-the-lens interviews

The VoxBox Pro is a mirror box that positions in front of the camera lens. It allows filmmakers to shoot down-the-lens interviews while maintaining eye contact between the interviewer and the subject.

  • Fits in seconds to existing 15mm rails, or to a lighting stand
  • Lightweight aluminium construction – built to last a lifetime
  • Converts to a Teleprompter using the included tablet holder
  • Complete with superior quality hard case and laser-cut foam
  • Can be stored in the case fully-rigged ready for instant use

6 in stock

SKU: VB2-1001E Category:


The new VoxBox Pro MKII has several new improvements over the previous model:

  • Completely re-designed and built using lightweight aluminium throughout.
  • Now you can use wider lenses (approx 24mm on a Super 35mm sensor; approx 35mm on a full frame sensor).
  • The glass mounting, height adjustment and tilting side mirror have been re-designed.

Effortless setup – be ready to roll in minutes

There are no cumbersome tripod plates or adaptors to fit – the unit simply attaches in place of your matte box to existing 15mm rails. The kit can be stored fully-rigged in the case meaning no time is wasted on location during setup – it can be rigged and ready to use in under two minutes! If you don’t have rails or you are using a DSLR, the kit includes a 16mm receiver allowing it to be mounted on a standard lighting stand.

Portable and Flexible

Challenging spaces are no problem for the VoxBox Pro – the unit can be quickly configured to allow the interviewer to sit at one of several possible positions. For shooting-producers/directors or camera operators, the unit comes with a side mirror which allows operation of the camera whilst maintaining eye contact with the subject through the VoxBox Pro. This flexibility allows you to quickly adapt to each location.

Converts to a Teleprompter

Switch from interview mode to Teleprompter mode in seconds! A tablet holder is included which attaches to the unit, converting it to a Teleprompter.

Designed for busy crews

With the time pressures facing crews on location, the VoxBox Pro makes life easier when shooting down-the-lens interviews. The ultra-quick setup allows you to spend more time getting the shot right – not trying to attach cumbersome adaptors and balance tripod plates. The sturdy, robust construction withstands day-to-day handling and uses hardware fixings throughout – not hook-and-loop or bungee cord found in similar products.

What’s in the box

  • Main box
  • Beamsplitter glass
  • Tilting side mirror
  • Tablet holder
  • Doughnuts (63, 80 & 112mm)
  • 16mm receiver
  • Printed instruction manual
  • Hard Case with laser-cut foam

NOTE: The cameras, tablet, stands and tripods shown are not included and shown for demonstration purposes only. The kit is not supplied with mounting rails; you should have these already if you have a matte box.

Additional information

Weight 9.8 kg
Dimensions of main box, without mounts (WxHxD

254 x 205 x 205mm

Weight of main box with beamsplitter glass


Aperture at rear of main box


Widest focal length (super 35 sensor)

approx 24mm

Widest focal length (full-frame sensor)

approx 30mm

Tablet holder maximum device size:

188mm (measured between the two clamps)

Light loss through beamsplitter glass

<1 stop

Hard Case Dimensions (WxHxD)

555 x 306 x 428mm

Case Temperature Rating

'-30 / 90°C (-22 / 194°F)'

Case Features


Weight including contents


Total size with packaging (WxHxD)

570 x 333 x 437

Total weight, as shipped


Select your currency
GBPPound sterling
EUR Euro